CO_2 conversion by thermal plasma with carbon as reducing agent: high CO yield and energy efficiency

A key problem in CO_2 conversion by thermal plasma is suppressing the inverse reactions,CO?+?O?→?CO_2 and CO?+?0.5O_2?→?CO_2, to simultaneously obtain high CO yield and energy efficiency. This can be done by quickly quenching the decomposed gas or rapidly taking away free oxygen from decomposed gas. In this paper, experiments of CO_2 conversion by thermal plasma with carbon as a reducing agent are presented. Carbon quickly devoured free oxygen in thermal plasma decomposed gas, and not only is the inverse reaction completely suppressed, but the discharge energy to form oxygen atoms, oxygen molecular, and thermal energy is also reused.A CO_2 conversion rate of 67%–94% and the corresponding electric energy efficiency of about 70% are achieved, both are much higher than that seen so far by other plasma implementations.     

电感耦合等离子体原子发射光谱法测定辛酸铑催化剂中铂钯铅铁铜铝镍

准确测定辛酸铑催化剂中杂质元素含量,是判定产品是否合格的重要指标之一。以往常采用直流电弧发射光谱法(摄谱法)进行检测,但测定周期长,且重复性较差。用电感耦合等离子体原子发射光谱法(ICP-AES)测定辛酸铑催化剂中微量杂质元素时,辛酸铑催化剂样品中含有的大量有机组分和铑基体会对测定有严重干扰。实验采用反复滴加硝酸消解样品中有机组分,再用王水溶解盐类,选用合适背景点扣除的方式消除铑基体的干扰,建立了使用ICP-AES测定辛酸铑催化剂中0.001%~0.1%(质量分数)Pt、Pd、Pb、Fe、Cu、Al、Ni等7种微量杂质元素的方法。各元素在0.10~10.00μg/mL范围内与其发射强度呈线性关系,相关系数均大于0.9999;方法检出限(μg/mL)为0.075(Pt)、0.0033(Pd)、0.015(Pb)、0.0036(Fe)、0.010(Cu)、0.001(Al)、0.012(Ni)。实验方法用于测定辛酸铑催化剂样品中Pt、Pd、Pb、Fe、Cu、Al、Ni,结果的相对标准偏差为(RSD,n=7)为1.4%~9.6%。按照实验方法测定辛酸铑催化剂中Pt、Pd、Pb、Fe、Cu、Al、Ni,并与直流电弧发射光谱法的测定结果进行比对,结果相一致。     

Influence of lanthanum on enhancement of mechanical and electrical properties of Cu-Al_2O_3 composites

Two kinds of Cu-Al_2O_3 composites(with and without La) were prepared via mechanical alloying-spark plasma sintering(MA-SPS) method. Microstructure, mechanical properties and electrical resistivity were investigated systematically using metallography, scanning electron microscopy, transmission electron microscopy, mechanical and electrical properties testing. The results indicate that an appropriate amount of La can homogenize the distribution of Al_2O_3. As such, yield strength, ultimate tensile strength and elongation of Cu-Al_2O_3-La are greatly increased. Some semi-coherent interface between Cu and Al_2O_3 is found, which means a low interface energy. The grain shape of Cu changes to irregular band with the addition of La. This change results in a density decrease of grain boundary and reduces electrical resistance. Lanthanum may exist in the form of La_2O_3.     

热处理对等离子喷涂铁基非晶合金涂层微观结构和耐腐蚀性能的影响

采用等离子喷涂技术在Q235钢基体上制备Fe48Cr15Mo14C15B6Y2非晶合金涂层,之后对涂层进行200,300,500,600,700℃热处理,研究了热处理对涂层微观结构、耐电化学腐蚀性能和耐均匀腐蚀性能的影响。结果表明:随着热处理温度的升高,涂层的非晶含量降低,孔隙率先减小后增大,经300℃热处理后涂层的孔隙率最低,且低于未热处理涂层的;热处理后涂层中的晶体相主要包括α-Fe,Fe-Cr,Fe63Mo37,Fe3C等;随着热处理温度的升高,涂层的自腐蚀电流密度先减小后增大,经300℃热处理后,自腐蚀电流密度最小,涂层的耐电化学腐蚀性能最好;经过热处理后,涂层在NaCl溶液中浸泡31d后的单位面积质量损失减小,且热处理温度越高,单位面积质量损失越小,涂层的耐均匀腐蚀性能提高。     

石墨烯改性涂层防护性能研究

为减少团聚，提高石墨烯在涂层中的分散性，研究采用纳米分散技术预先制备了石墨烯分散液，再将其分散至环氧树脂中获得石墨烯改性复合涂层。通过对石墨烯含量为 0、0.3%、0.6%的复合涂层进行盐水浸泡、盐雾、阴极剥离实验及电化学性能测试，证明石墨烯的加入显著增强了涂层的防护性能。石墨烯复合涂层在 3.5%盐水中浸泡 1 008 h后，涂层低频阻抗仍大于 106 Ω·cm²比未添加石墨烯的涂层提高了 3个数量级，且盐雾实验 6 000 h后涂层表面仍保持完好；含 0.6%石墨烯，的涂层耐蚀行为劣于石墨烯含量为 0.3%的涂层。     

Comparison of Laguerre-Gaussian and Donut modes for MDM-WDM in OFDM-Ro-FSO transmission system

Radio-over-free-space-optics (Ro-FSO) technology may pave the way towards a ubiquitous platform for seamless integration of radio and optical networks without expensive optical fiber cabling. In this paper, to increase the capacity of Ro-FSO, mode division multiplexing (MDM) of two modes has been capitalized in a three-channel WDM system spaced by 1 nm over a FSO link of 80 km, resulting in a 120 Gbps six-channel Ro-FSO system. The SNR and received power of MDM of two Laguerre-Gaussian modes LG00 and LG01 is compared with respect to MDM of two transverse donut modes. The performance of four-level quadrature amplitude modulation (QAM) for orthogonal frequency division multiplexing (OFDM) of radio subcarriers in the WDM-MDMs system is investigated for mitigation of frequency-selective fading under strong atmospheric turbulence.     

Twenty-five years of total antioxidant capacity measurement of foods and biological fluids: merits and limitations

This review summarises 25 years of investigations on antioxidants research in foods and biological fluids and critically analyses the merits and limitations of using the total antioxidant capacity (TAC) measurement in the metabolomic era. An enormous bulk of knowledge was produced regarding the antioxidant capacity of foods and large TAC databases were developed. A direct link between a food TAC value and any health benefit is erroneous and has led to several cases of consumer deception. However, the striking epidemiological evidence associating a high dietary TAC with some disease prevention and the availability of well-constructed TAC databases deserve attention and must be taken into account to establish the usefulness of measuring TAC in both foods and biological samples. The in vivo TAC measurement, usually performed in plasma, is influenced by many external factors, such as dietary habits, as well as environmental and behavioural factors, which are integrated towards homeostatic control by fine physiological mechanisms with high inter-individual variability. Therefore, plasma TAC cannot be considered as a unique biomarker of individual antioxidant status. However, the combined evaluation of plasma TAC with known markers of disease, individual metabolism, inflammation and genetics, as well as with markers of gut microbiota composition and activity, may lead to the identification of populations that are more responsive to food/diet TAC. In this framework, the appropriate use of TAC measurement both in food and in vivo can still provide support for the interpretation of complex phenomena and be a tool for sample screening when making a quick decision toward in-depth research investigations. © 2018 Society of Chemical Industry     

高频氢等离子体增强还原制备超细铜粉

利用高频感应热氢等离子体强化还原制备超细铜粉，考察了加料速率、还原氢气流量、氢气分布位置、反应区空间、冷却温度等因素对铜粉颗粒性能的影响，对制备的铜粉颗粒进行氧含量、XRD晶体结构、松装密度、粒度分布和比表面积的表征。结果表明，优化的工艺条件为反应区内径100 mm，加料速率4 g/min，淬火气氩气气量500 L/h，氢气气量500 L/h并通入少量载气，由氢等离子电离产生的氢自由基可强化反应实现瞬时还原，不仅可控制铜粉形貌，还能有效控制铜粉颗粒大小；利用该方法制备出粒径分布100?200 nm、分散性好的超细球形铜粉颗粒。该方法操作简便、产品纯度高、气氛可控、对环境污染小。     

不同镀层结构钢的耐盐雾腐蚀性能比较

通过盐雾试验模拟潮湿环境,对裸钢试片、电镀锌钢试片、化学镀镍-磷钢试片和化学镀镍-钴-磷钢试片进行了宏观形貌、微观形貌和腐蚀产物成分分析,比较了四个试片的耐盐雾腐蚀性能。结果表明:在盐雾环境中,四个试片均会发生电化学腐蚀,生成不同的腐蚀产物;在盐雾腐蚀周期内,裸钢试片的腐蚀速率最高,化学镀镍-磷钢试片和化学镀镍-钴-磷钢试片的腐蚀速率较低;四个试片在腐蚀过程中的阳极反应和阴极反应不同,腐蚀后的微观形貌存在明显差异。     

Beneficial role of carbon black on the properties of TiC ceramics

This investigation aimed to study the influence of carbon black on the qualifications of TiC-based materials. For this objective, two samples, namely monolithic TiC and TiC-5 wt% carbon black were sintered by spark plasma sintering (SPS) method at 1900 °C. X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) were used to characterize the as-sintered samples. Introducing carbon black enhanced the relative density of TiC significantly, reaching a near fully dense substance. Phase analysis and microstructural studies manifested the formation of non-stoichiometric TiC_x in both ceramics. Although the introduction of carbonaceous additive considerably increased the thermal conductivity and flexural strength of TiC, standing at 25.1 W/mK and 658 MPa, respectively, its influence on the Vickers hardness was trivial (both ~ 3200 HV_0.1 kg). Finally, the composite specimen presented a lower coefficient of friction (~ 0.31) on average compared to the undoped TiC (~ 0.34).